Il RUTXR1 è il primo router LTE Cat6 di Teltonika con alimentatori ridondanti e interfaccia WAN e pensato per essere collocato in rack. Questo device è basato su sistema operativo RutOS, ha un processore quadcore ed è la scelta ideale dove occorra una connettività veloce e ultra affidabile. RUTXR1 è dual SIM, ha porte USB eWave-2 802.11ac Dual Band Wi-Fi e può contare su protocolli di sicurezza di altissimo livello, come tutti i prodotti Teltonika. Ma ciò che distingue questo prodotto dal resto del portfolio Teltonika sono le porte SFP WAN e le porte predisposte per la collocazione in un cabinet server. Queste caratteristiche lo rendono ideale come router primario in small office o home office, perché in un unico device troviamo connettività LTE e Wi-Fi e non è necessario alcun convertitore SFP addizionale.
Mobile
- Mobile module 4G (LTE) – Cat 6 up to 300 Mbps, 3G – up to 42 Mbps
- SIM switch 2 SIM cards, auto switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail
- Status Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID
- SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply
- Black/White List Operator black/white list
- USSD Supports sending and reading Unstructured Supplementary Service Data messages
- Multiple PDN Possibility to use different PDNs for multiple network access and services
- Band Managment Band lock, Used band status display
- APN Auto APN
- Bridge Direct connection (bridge) between mobile ISP and device on LAN
Wireless
- Wireless Mode 802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
- Wi-Fi Security WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
- ESSID ESSID stealth mode
- Wi-Fi Users Up to 150 simultaneous connections
- Wireless Hotspot Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
Ethernet
- WAN 1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
- Fiber 1 x SFP port (cannot work simultaneously with Ethernet WAN port)
- LAN 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Console
- Console RS-232 (RJ45) console port for router configuration and debuging
Network
- Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
- Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL), DLNA
- VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
- Connection Monitoring Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
- Firewall Port forwards, traffic rules, custom rules
- DHCP Static and dynamic IP allocation, DHCP Relay, Relayd
- QoS Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
- DDNS Supported >25 service providers, others can be configured manually
- Load Balancing Balance Internet traffic over multiple WAN connections